The next project was to improve the way the tail electrical conduit was mounted to the aft bulkhead. Previously, I'd attached it with a couple of zip-ties around a bulkhead fitting, but this particular support needs to be absolutely, positively secure, and for a good long time. Once the empennage is mounted permanently, this area will be hard to get to, and the conduit is above the right rudder cable. I fabricated an angle bracket and, with the help of my friend Bill, attached it to a nearby bulkhead and bolted a good old Adel clamp to it. That conduit isn't going anywhere. My mind is now completely at ease about that installation.